F22A and F22B Non-vtec

Years of research and development have yielded an array of Bisimoto Spec camshafts for the F22A and F22B Non-Vtec SOHC Powerplants. Street, race and dyno tested, Bisimoto specs have been utilized around the world with amazing results and broken records. Camshaft specs depict vtec engaged lobs only. Level 1, All Motor: Offers a 10% improvement in power over factory, with stock-like idle, with emphasis on the 1500 to 5700 rpm range. Emissions friendly. Takes 7-10 business days to manufacture, after stock cam core is received. Cam gears highly recommended. Purchase stock cam core, if one is not available. 0.396″ valve lift on the intake, 0.369″ exh; 212 deg duration on intake and 216 deg exhaust at 0.040″ Level 1.2, Turbo: The best non-vtec street turbo cam in the world! Designed by Bisimoto, and proven to show over a 60whp gain at 8psi! Customer must supply cam core, or purchase one from calling in or online store. Emphasis, 1700 to 6100 RPMs Level 2 All Motor: Best seller!! Offers a 15% improvement in power over factory, with stock-like idle, with emphasis on the 1700 to 5900 rpm range. Takes 7-10 business days to manufacture, after stock cam core is received. Cam gears, and our pro valve springs are highly recommended. Purchase stock cam core, if one is not available. Level 2.3 Nitrous: Ideal for Nitrous powerplants, and superior to n/a grinds.! Pro springs are a must! Cam gear recommended. Level 2.4 Turbo: Hot street and race Turbo only. Emphasis on the 3000 to 7900 rpm range. Takes 7-10 business days to manufacture, after stock cam core is received. Cam gears, EMS, and Bisimoto pro valve springs are a must. Purchase stock cam core, if one is not available, with perfect lobe separation! Hardweld Profile. Level 3 All Motor: Custom Cam to be used with Engine Management or dual carbs, street/strip and full race profiles. Customer will have to fill out spec sheet. Hardweld Profile. Level X, All Motor: Professional use only. Offers over a 27% improvement in power over factory, with a lopey idle; emphasis on the 3500 to 8400 rpm range. Takes 7-10 business days to manufacture, after stock cam core is received. Cam gears, headwork, EMS or carburetors, custom rocker arms, and Bisimoto pro valve springs/retainers are a must. Purchase stock cam core, if one is not available. Secret specs. Cam used by Bisimoto to run 9 second elapsed times. Hardweld Profile. *Upon order placement, we will solicit cam core/factory camshaft. *Camshaft profile is highly dependent on factory core size. Small camshafts (automatic trans engines, or smaller EURO/JDM cores will yield slightly smaller duration and lift numbers) * Custom grinds available as well. Units take 7-10 business days to manufacture.